Reform
Water-based, fluid, emulsifiable, water-soluble two-component epoxy formulation with low viscosity and high wetting power, with catalysis ratio between Base and Reagent 1 to 1.
VOC lim 30 g/l - actual VOC < 25 g/l (excluding water).
Pre-mix component A (Base) with propeller/shovel mixer, then add the second component B (reagent) and mix for a minimum of 3 minutes until the mixture is homogeneous in density and colour.
Perfectly emulsify the two components until a uniform creamy white appearance is obtained; add at least 50 per cent of the required amount of water and mix well to reduce the viscosity of the system; then add the remaining dilution water and mix again.
Combine the different components, taking care to mix thoroughly by stirring at low speed in order to obtain a homogeneous colour mixture. It is recommended to take particular care when mixing all the mixture within the individual components; with the help of a spatula/knife, collect the product from the walls/bottom of the pot in order to maintain the catalysis ratios.
