Idrogel Matt
Two-component polyurethane product in water emulsion made with special resins and technological charges designed to allow intense cross-linking and rapid hardening. The product offers resistance to light (U.V.) with minimal yellowing and no chalking.
Good resistance to weathering and diluted chemicals. Also available in a neutral, pigmentable version.
TRANSPARENT VOC lim 140 g/l - Real VOC 40 g/l
Pre-mix component A (Base) with a propeller/blender and then add the second component B (reagent) and mix for a minimum of 3 minutes until the mixture is homogeneous in density and colour.
If it is necessary to divide the packages, take care to mix all the coloured component well to disperse the pigments evenly. Then, with the help of a precision balance, divide the components, taking scrupulous care to maintain the catalysis ratios of the individual elements, so as not to incur poor performance.
Observe particular care in the partial use of the 'Part B-reagent' package and its subsequent closure and re-opening for re-use. In order to preserve the contents, it is necessary to apply a certain amount of pressure to the can once it has been closed again in order to allow as much air to escape as possible; afterwards, it is advisable to turn the can upside down for 3 to 5 minutes: this promotes the formation of a film of product near the edge of the lid, which reacts with the moisture to re-seal the contents and thus favour a longer life for the product inside
